Stainless ge 1/6 hp ac motor supplier made in China – replacement parts – in Baku Azerbaijan Steel Barrel Production Line with top quality

Stainless ge 1/6 hp ac motor provider  created in China - alternative elements -  in Baku Azerbaijan  Metal Barrel Generation Line with best top quality

We – EPG Team the biggest worm gearbox, couplings and gears manufacturing unit in China with 5 diverse branches. For far more information: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828 /

Full steel drum generation line

 

I. Uncooked supplies intake/manufacturing capacity
 

Plate thickness (mm) Finihed drums (pcs/T) Creation capacity (kg/pc)
1.two forty one 21.5
1.0B Up and bottom addresses 1.2 47 19
Drum entire body 1.
1. fifty eighteen
0.9B Up and base addresses 1. 54 16.8
Drum body .nine
0.nine 56 16.2
.eight   97 ten.28

 

II. Full metal drum manufacturing services

A. Front segment products
one. Decolier
two. Hydraulic Up-coiling unit
three. Hydraulic supporter
4. Side deviation rectifying system
5. Sizing & flattening equipment
6. Cutting equipment – for drum entire body
seven. Cutting device – for waste sheet
8. Arch form guiding unit
9. Stac ept car
ten. Hydraulic system
11. Electric powered manage program
twelve. Prime & Bottom cover conveyor unit

one.Hydraulic Up-Coiling  Device

   a) Up-Coiling Support Platform is for storing metal coil and facillitate Content Feed Trolley for delivering material.

   b) Material Feed Trolley is employed for carry steel coil.. It is operated with hydraulic program to push cylinder for

   reciprocating linear motion and equipment box to produce steel coil in parallel to the middle of uncoiling device so as to

   assure the fixing.

two.Decoiler & Hydraulic Supporter

a)Uncoiling width: 916-1320mm

b)Plate thickness: .6-1.2mm

c)Motor electrical power: 5.0KW

d)Uncoiler capacity: 10t

e)Inside diameter: ¢470-520mm, Outside diameter: ≤¢1200

f)Machine size: 3900x1500x1940(mm), Total bodyweight: 5T

three.Sizing &Flattening Device
Quick introduction:7 rollers operating,servo computerized sizing,worm and equipment modify the leveled plate thickness.

Perform:The clearances of up and down rollers can be adjusted by the upper hand-wheel although determine can be demonstrated by dial indicator. The operation linear speed is adjusted step-considerably less. It can be controlled by the signal of mid-bridge for high and low speed change. 

Major technics:

a)Plate width: 916-1320(mm)

b)Plate thickness:.6-1.2(mm)

four. Chopping Equipment
Purpose: Minimize the leveled steel plate into drum entire body.

Main technics:

a)Plate width:≤1500mm

b)Plate thickness:≤3mm

c)Motor electrical power: 3.0KW

d)Chopping ability:≤20 occasions/min

e)Equipment dimension:1800x950x1500(mm),Complete weight: 3T

 5.Hydraulic Station

Function:Offer oil for the oil cylinder of decoiler, lifting device,uncoiling supporter,and overturn device to make certain stably functioning.

Major technics:

a)Motor energy:7.5KW

b)Device dimensions:800x800x1500(mm),Complete fat: .5T

six.Electric powered Manage Technique
Purpose: Manage the decoiler,flattening equipment and other entrance area equipments operating.

B. Protect equipment
1. Best & Bottom cover mould
two. Double loc ept mould
three. 63T pressing equipment
4. 160T urgent equipment
5. Pre-coiling & Gluing equipment

1. Top & Bottom go over mould

Brief introduction:Equipped with two sets of 160T pressing equipment

Perform: Punching the bottom cover

Principal technics:

a)Motor energy:18.5KW

b)Wor ept potential:5-26 pcs/min

c)Machine size:2185x1420x3070(mm),Complete fat: fourteen.5T

two.Drum Injection Mould

Short introduction: Outfitted with 1 set of 63T pressing machine

Double punching mould: punch oil filler and breathable mouth of the base protect.

Machine dimension: 710x480x300(mm)

Total bodyweight: .5T

Double loc ept mould: lock oil filler and breathable mouth of the base go over.

Device measurement: 710x480x300(mm)

Total excess weight: .5T

Major technics:

a)Motor energy: 11KW

b)Device size :1800x1232x2550(mm)

c)Complete weight: 5.5T

three.Pre-Coiling & Gluing Equipment

Short introduction: Pre-coiling device for the bottom cover, cylinder thrust the cam to perform, automatic glue- spaying technique.It has positive aspects of basic safety,stablity, easy edging.

 Main technics:

a)Device dimensions:1600x1400x1350(mm)

b)Whole excess weight: 4.5T

C. Middle section equipment

1. Stac ept table
2. Circle-rolling device
three. Seam welding machine
4. Edging & Beading machine
five. Corrugation (W Rib) device
6. Edge-curling machine
seven. Express system
8. Electric control method
nine. Leakage chec ept machine

1.Circle-rolling Device

Quick introduction:3 rollers doing work.

Primary technics:

a)Rolled plated width:≤1100mm

b)Plate thickness:.6-1.2(mm)

c)Circle diameter:≤570mm

d)Motor electrical power:1.5KW

e)Equipment measurement:2200x750x1300(mm),Complete fat: 1.5T

2.Seaming Device(BH-150-5Z)

Quick instruction:This computerized seaming machine dismisses the spot welding method,it is our recently  developed drum seaming device.All of components adopts domestic outstanding raw materials,cupreous welding rollers.

Principal technics:

a)Welding Device capacity:150KVA

b)Driving variety: pneumatic 

c)Existing: alternating existing

d)Frequency range: large frequency

e)Wor ept principle : contravariant 

3.Edging&Beading Device

Limited introduction:managed by PLC,hydraulic push

Main technics:

a)Beading peak:≤14mm

b)Drum height:894-905(mm)

c)Hydraulic system force:8Mpa

d)Air strain:.1Mpa

e)Equipment size:3700x700x1600(mm),Total bodyweight: 5T

Hydraulic Station:

Primary technics:

a) Equipment dimensions: 1800x860x1700 (mm)

b) Total fat: 1T

c) Motor electricity: 22KW

four.Corrugation (W rib) Machine

Short introduction:controlled by PLC,hydraulic generate

Primary technics:

a)Corrugating top:≤3mm

b)W rib top:≤9mm

c)Drum top:884-895(mm)

d)W rib area:280mm

e)Motor electrical power:11KW

f)Equipment measurement:4500x650x2100(mm),Whole excess weight: 7T

Hydraulic station:   

a)Machine size:1800x860x1700(mm)

b)Complete weight: 1T

c)Motor power: 7.5KW

five.Edge-Curling Device

Brief introduction:controlled by PLC,hydraulic push,7 levels edge curling.

Principal technics:

a)Drum top:886-897(mm)

b)Motor energy:45KW

c)Equipment size:4800x1300x2200(mm),Complete weight: 13T

Hydraulic station:   

a)Equipment size:1800x860x1700(mm)

b)Total fat: 1T

c)Motor power: 7.5KW

6.  Leakage Chec ept Equipment

Short introduction:Manual/automatic handle,pneuma lock.

Main technics:

a)Chec ept drum diameter:560-570(mm)

b)Drum top:886-897(mm)

c)Strain:.03Mpa

d) Equipment dimensions:2530x700x1100(mm),Complete fat: 2T

7.Multi-part Convey Device

Brief introduction:Express the drum human body to be edged,beaded,Corrugated W rib reinforced and sealed base go over with PLC controlling.

Main technics:

a) Motor electrical power:4.0KW

b) Equipment dimensions:11000x2100x1000(mm)

c) Overall weight: 3T

D. Rear part equipment
one. Front area trans-line
two. Degreasing & Phosphorization room
three. Washing & Drying place
four. Overturn gear
five. Portray place
6. Entrance drum-separation device
seven. Drying space soon after painting
eight. Bck drum separation machine
9. Air cooling system
10. Rear section trans-line
eleven. Electric manage method

one. Degreasing & Phosphorization Space

Quick introduction: This component is used to transport the drums,controlled by PLC, adopts spraying gadget to automatic clean the coil, phosphorize and washing the grease on the drums. The conveyor system adopts superior steel, inwalls are made of  1mm steel plate.

Main technics:

a)Equipment dimension:36000x2110x2060(mm)

b)Complete bodyweight: 30T

2. Washing & Drying Area

Brief introduction:Drying the h2o on the surface area of the drum, managed by PLC.The whole machine adopts fuel heating devices.Supporter is set up on the top of the area, so that hot and cycling wind can be produced to speed up the drying.

Major technics:

a) Motor electrical power:25KW

b) Machine dimension:20000x1920x3600(mm)

c) Overall weight: 25T

three.Painting Area(double shades)


Operate:  The conveyor system is controlled by PLC, rotating table make the drums carefully, painting program paint the drums in & outside with the spray gun. One shade or a variety of can be option. Method of drinking water-curtain spraying dispels spraying smoke.Nozzle adopts Nordson Brand name, Portray products is produced of Chang Jiang.

Primary technics:

a) Motor energy: 55KW

b) Machine size: 7400x4990x3600(mm)

c) Total bodyweight: 15T

4.Entrance Drum Distributor

Purpose: Transport the drums to the conveyor line of outside painting&stiffening place, the cylinder is controlled by PLC.

Primary technics:

a) Motor power: 2.0KW

b) Device dimension: 1500x1050x800(mm)

c) Overall fat: 1T

five.Drying Line after Painting

Purpose: The conveyor unit is managed by PLC, adopts fuel heating inwall of the place is geared up with heating tubes. Admirer is put in on the best of the place, so that dry the paint.

Primary technics:

a) Motor electricity: 35KW

b) Machine dimension: 36000x2100x4300(mm)

c) Complete excess weight: 30T

6.Down-drum Roller Trans-line

Purpose: The system transports the dried drums to the ground.

Principal technics:

a) Motor electrical power: 1.5KW

b) Machine dimensions:2000x900x800(mm)

c) Complete weight: .3T

7.Overturn Products

Purpose: Change the state of drums from horizontal to vertical, so that it will be much easier to paint, controlled by Cylinder.

Principal technics:

a) Machine measurement: 1400x690x850(mm)

b) Complete bodyweight: .5T

 

 

 

 

 

 

   

 

 

 

 

 

/ The use of original gear manufacturer’s (OEM) component figures or trademarks , e.g. CASE® and John Deere® are for reference functions only and for indicating item use and compatibility. Our organization and the detailed substitute parts contained herein are not sponsored, accepted, or manufactured by the OEM. /

Stainless ge 1/6 hp ac motor provider  manufactured in China - replacement parts -  in Baku Azerbaijan  Steel Barrel Production Line with top good quality

Stainless ge 1/6 hp ac motor provider  made in China - substitute elements -  in Baku Azerbaijan  Metal Barrel Manufacturing Line with top top quality